Re: PROJECT turbobrick
Posted: Sun Jan 17, 2010 7:20 pmGood progress John.
Interesting powerplant. What happened to the Granada 24v conversion??
West of Scotland RSOC
https://www.westofscotlandrsoc.com/forum/
PROJECT THUNDER new colour started 14/6/13
https://www.westofscotlandrsoc.com/forum/viewtopic.php?f=17&t=5783
Page 5 of 15
Posted: Sun Jan 17, 2010 7:20 pmRe: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 7:26 pmRe: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 7:46 pmsome more pics for you m8 
JOHNS CHOP SHOP
TO ME TO YOU TO ME TO YOU
CONCENTRATION OFF 5 NINJAS
COULD ONLY FIND ONE BAD CRACK
JOHNS CHOP SHOP
TO ME TO YOU TO ME TO YOU
CONCENTRATION OFF 5 NINJAS
COULD ONLY FIND ONE BAD CRACK
Re: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 7:49 pmeasyer and a lot cheeper to get power this way. will start with around 210/230 bhp to get used to being on the track again, now that it will be RWD, then we'll take it form there. 
can get these engines quite cheep too. so will get one to rebuild, week point of them is conrods, but cheep from america.
cheeRS john
can get these engines quite cheep too. so will get one to rebuild, week point of them is conrods, but cheep from america. cheeRS john
Re: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 8:42 pmpaul u are an arse
Re: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 9:07 pmRe: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 10:14 pmlooking good john , will be interesting to see it with the volvo engine in it
will it fit to mt75 box or are you going to use different gear box
will it fit to mt75 box or are you going to use different gear box
Re: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 10:32 pmRe: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 10:52 pmcouldn't resist a few more pics as i was putting bits and bobs away.
must say a big to haudit and dodit for all there help today
cheeRS john
must say a big to haudit and dodit for all there help today
cheeRS john
Re: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 11:37 pmlookin forward to seeing the car all together John, your makin good progress mate 
Re: PROJECT turbobrick updated 17/1/10
Posted: Sun Jan 17, 2010 11:46 pmRe: PROJECT turbobrick updated 17/1/10
Posted: Mon Jan 18, 2010 12:24 ami am a bum with no job but a want the fez back to get out the house ,,,,,,,,,if u aint to far away i can help u if u want
you have a grinder cos I can bring mine lol lol
you have a grinder cos I can bring mine lol lol
Re: PROJECT turbobrick updated 17/1/10
Posted: Fri Jan 22, 2010 10:39 pmseemed to go backwards today. took the rear part of the kit off to start doing the rear arch. didn't want to risk the kit. 
got this wee bit done. bottom of inner sill repaired and started to fill gap in arch
only got an hour at it. will be welded up tomorrow with kit back on.
got this wee bit done. bottom of inner sill repaired and started to fill gap in arch
only got an hour at it. will be welded up tomorrow with kit back on.
Re: PROJECT turbobrick updated 17/1/10
Posted: Fri Jan 22, 2010 11:10 pmPROJECT SLIPPERS AND PIPE COMING ALONG NICE
Re: PROJECT turbobrick updated 17/1/10
Posted: Fri Jan 22, 2010 11:27 pmRe: PROJECT turbobrick updated 17/1/10
Posted: Sat Jan 23, 2010 12:57 amReally like the look of this john, what colour you goin mate?
Re: PROJECT turbobrick updated 17/1/10
Posted: Sat Jan 23, 2010 10:25 pmgot the rear arch finnished tonight.
cheeRS john
cheeRS john
Re: PROJECT turbobrick updated 17/1/10
Posted: Sat Jan 23, 2010 10:32 pmlooking good m8 will get a look tomorrow after the road trip
Re: PROJECT turbobrick updated 17/1/10
Posted: Sat Jan 23, 2010 10:38 pmRe: PROJECT turbobrick updated 23/1/10
Posted: Sun Jan 24, 2010 10:27 pmno update today. see alans winter project for the reason. 
cheeeRS john
cheeeRS john